RUBBER BELT
TG13
Shot Blasting Machine Description
The TG13 shot blasting machine is designed for direct floor installation, with no need for masonry work or dedicated foundations. This feature simplifies commissioning operations, reduces installation time, and allows rapid integration of the system into existing production flows.
The cycle is fully optimized: material is loaded via a dedicated hydraulic skip loader, which precisely lifts and tips the container, depositing the parts onto the anti-abrasive rubber belt. The system moves the load continuously and in a controlled manner, ensuring uniform rotation of the parts inside the chamber.
Two high-performance turbines project the metallic shot onto the exposed surfaces, while the internal tumbling motion ensures constant mixing of the material, avoiding shadow areas and guaranteeing uniform blasting on every part.
With a working capacity of 1400 mm and a maximum load of 800 kg, the TG13 is an ideal solution for processing large components or high-volume batches, with optimized cycle times and high operational reliability.
A system designed for those seeking real efficiency, ease of management, and long-term durability. Every function is aimed at productivity, with no compromises.
Supports loads up to 800 kg
The TG13 shot blasting machine is engineered to handle demanding loads with maximum efficiency. Its high‑strength rubber belt, controlled by an inverter, supports up to 800 kg without performance loss, ensuring a smooth and consistent workflow even under heavy-duty conditions.
Every component is designed to streamline production flow and minimize downtime. The belt‑driven handling system, combined with inverter‑controlled adjustable turbines, allows power and speed to be fine‑tuned to the material and the required finish, maintaining the right balance between impact energy and treatment delicacy.
The increased load capacity means fewer processing cycles and higher productivity, giving full control over the final result while significantly reducing the cost per treated part.
Perfectly built for your container
Every company has its own processes, loads, and containers. That’s why we don’t offer adjustments – we build solutions from scratch. Our custom hydraulic skips are engineered to integrate seamlessly with your existing containers, eliminating inefficiencies between internal logistics and the machine.
Each skip is developed to spec, taking into account dimensions, weights, volumes, and operating methods. The container doesn’t adapt to the shot blasting machine – the machine adapts to your production reality. This approach ensures smooth, precise, repeatable loading and unloading, even during intensive cycles or with non‑specialized operators.
The lifting and tipping system is hydraulically controlled and designed to provide maximum stability throughout the entire cycle. Material is distributed evenly onto the anti‑abrasive rubber belt, avoiding localized build‑ups or waste while optimizing distribution for a uniform and effective blasting process.
Every second saved in loading is a second gained in productivity. And every evenly treated part is another step toward process efficiency. That’s why our skips aren’t accessories – they’re key elements of the production logic.
No compromises. No adjustments. Just precise performance, custom‑built for your company.
2 Turbines. More Power. More Efficiency.
The TG13 is equipped with two high‑performance centrifugal turbines, both controlled by inverters that allow continuous speed adjustment between 1,500 and 3,000 rpm. This setup enables precise modulation of the shot impact energy, adapting to part geometry and the required finish level.
Electronic control via inverter turns the turbine from a simple mechanical component into a process control tool. The operator can fine‑tune surface roughness, achieving either delicate or more aggressive results with consistency and repeatability, even on variable batches.
Beyond operational flexibility, intelligent turbine control helps optimize abrasive consumption, reducing waste, wear, and operating costs. The system always delivers the right power only when needed, boosting overall cycle efficiency.
Controlling power means controlling the outcome. With inverter‑driven turbines, the TG13 gives you a tangible advantage: every cycle becomes a governed process, not just a task performed.
Dimensions. Perfect Use of Space.
Our system is designed to deliver maximum efficiency in minimal space. Every dimension is purpose‑driven: high operational performance packed into a footprint where space is a critical, non‑negotiable factor.
Compact proportions don’t mean compromise. The loading height is optimized for easy operator access, while the internal layout ensures direct access to maintenance points, reducing service time and increasing long‑term reliability.
The entire layout is built to support a continuous, organized, and safe workflow. No wasted space. No unnecessary obstacles. Just a compact, functional structure ready to integrate seamlessly into modern industrial setups.
TECHNICAL SHEET
| MARCA: | FONDSAB |
| MODELLO: | TG 13 |
| MATRICOLA: | Nuova |
| ANNO: | Nuova su ordinazione |
| CARATTERISTICHE TECNICHE | |
| LARGHEZZA UTILE | 1300 |
| ALTEZZA UTILE | 600 |
| PORTATA MAX. | 800 KG |
| TURBINA INSTALLATA TB360: | Nr. 2 da 7,5 Kw |
| VELOCITA' TURBINA REGOLABILE | SI |
| PORTATA GRANIGLIA SINGOLA TURBINA : | Kg/min 100 |
| Q.TA GRANIGLIA NECESSARIA PER AVVIAMENTO: | Kg 1000 |
| ENERGIA ELETTRICA RICHIESTA: | Kw 35 |
| TENSIONE : | V 380/Hz50 aux V110/Hz50 |
| VOLUME ARIA RICHIESTO: | 2000 mc/h |
| MATERIALE GRANIGLIABILE: | Ferro/acciaio/alluminio/ottone |
| ALTEZZA DI CARICO BENNA: | Pavimento |
| FONDAZIONE: | L'IMPIANTO NON NECESSITA DI FONDAZIONE |
| DIMENSIONI MACCHINA: | |
| LARGHEZZA: | 2500 mm |
| LUNGHEZZA | 5440 mm |
| ALTEZZA: | 5000 mm |
| DIMENSIONI FILTRO : | FC4 / FC6 |
| LARGHEZZA: | Su richiesta |
| LUNGHEZZA | Su richiesta |
| ALTEZZA: | Su richiesta |
. . .
