Stainless steel spherical shot
Spherical stainless-steel shot is produced from selected raw materials in modern plants that guarantee consistent quality over time. It is obtained by casting and then heat treatment to give it optimal resilience and fatigue resistance.
Standard shot sizes including the chemical-physical analysis are as shown in the table below.
SKU: 43682
Technical data sheet
Additional information
Technical data
| 0,10 | 0,20 | 0,30 | 0,40 | 0,50 |
| 0,05 – 0,20 mm | 0,09 – 0,30 mm | 0,14 – 0,50 mm | 0,40 – 0,80 mm | 0,60 – 1,0 mm |
| 0,60 | 1,00 | 1,50 | 2,00 | 3,00 |
| 0,70 – 1,25 mm | 1,00 – 1,25 mm | 1,25 – 1,70 mm | 1,40 – 2,00 mm | 1,70 – 3,00 mm |
Chemical analysis
| C | Cr | Ni | Si | Mn | Hardness |
| ca. 0,17% | ca. 17 – 18% | ca. 0,70 – 10,0% | ca. 1,8% | ca. 1,2% | ca. 450 HV |
