Stainless steel cylindrical shot
The main characteristics of stainless-steel cylinders are consistency of size and chemical analysis, the absence of impurities - blowholes - cracks.
They are obtained by drawing stainless steel wire and can be able to maintain their physical characteristics until exhaustion. They are very suitable for blasting operations in short times. The diameter is always equal to its length, so a 0,5 mm diameter cylinder will be 0.5 mm long. Standard types including chemical-physical analysis are as shown in the table below.
SKU: 43679
Technical data sheet
Additional information
Technical data
| C.W. 0,3 | C.W. 0,4 | C.W. 0,5 | C.W. 0,6 | C.W. 0,7 | C.W. 0,8 | C.W. 0,9 |
| 0,30 mm | 0,40 mm | 0,50 mm | 0,60 mm | 0,70 mm | 0,8 mm | 0,9 mm |
| C.W. 1,0 | C.W. 1,2 | C.W. 1,5 | C.W. 1,8 | C.W. 2,0 | C.W. 2,2 | C.W. 2,5 |
| 1,00 mm | 1,20 mm | 1,50 mm | 1,80 mm | 2,0 mm | 2,2 mm | 2,5 mm |
Chemical analysis
| C | Cr | Ni | Hardness |
| ca. 0,3% max | ca. 17 – 18% | ca. 8 – 10% | ca. 30 – 35 HRC |
