Ferritic spherical shot
Ferritic spherical shot is produced from selected raw materials in modern plants that guarantee a consistent quality over time. It is obtained by casting and then heat treatment to give it optimal resilience and fatigue resistance.
Standard shot sizes including the chemical-physical analysis are as shown in the table below.
SKU: 43682
Technical data sheet
Additional information
Technical data
| S 070 | S 100 | S 170 | S 230 | S 280 | S 330 |
| 0,20 – 0,40 mm | 0,30 – 0,60 mm | 0,50 – 0,80 mm | 0,60 – 0,90 mm | 0,70 – 1,10 mm | 0,80 – 1,20 mm |
| S 390 | S 460 | S 550 | S 660 | S 780 | S 930 |
| 1,00 – 1,60 mm | 1,20 – 1,80 mm | 1,50 – 2,20 mm | 1,80 – 2,60 mm | 2,00 – 2,80 mm | 2,80 – 3,15 mm |
Chemical analysis
| Carbon content | C | Mn | Si | S | P | Hardness |
| Low | ca. 0,10% | ca. 0,15% | ca. 0,15% | ca. 0,015% | ca. 0,015% | ca. 40 – 46 HRC |
| High | ca. 0,80% | ca. 0,60% | ca. 0,70% | ca. 0,05% | ca. 0,05% | ca. 42 – 48 HRC |
