Ferritic Cylindrical shot
The main characteristics of ferritic cylindrical shots are the constancy of size and chemical analysis, absence of impurities – blowholes - cracks. They are obtained by drawing carbon steel wire and can maintain their physical characteristics until exhaustion. Very are very suitable for blasting operations in short time. The diameter is always equal to its length, so a 0.5 mm diameter cylinder will be 0.5 mm long.
Standard types including chemical-physical analysis are as shown in the table below.
SKU: 43680
Technical data sheet
Additional information
Technical data
| C.W. 0,4 | C.W. 0,5 | C.W. 0,6 | C.W. 0,7 | C.W. 0,8 | C.W. 0,9 |
| 0,40 mm | 0,50 mm | 0,60 mm | 0,70 mm | 0,8 mm | 0,9 mm |
| C.W. 1,0 | C.W. 1,2 | C.W. 1,5 | C.W. 1,8 | C.W. 2,0 | C.W. 2,2 |
| 1,00 mm | 1,20 mm | 1,50 mm | 1,80 mm | 2,0 mm | 2,2 mm |
Chemical analysis
| C | Mn | Si | P+S | Hardness |
| ca. 0,40 – 0,70% | ca. 0,30 – 0,70% | ca. 0,10 – 0,30% | ca. < 0,4% ma | ca. 40 – 50 HRC |
